4
Manual Document# 3PXCC4A3001
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
4. Assign Address and IRQ – The address and IRQ are set in the
operating system that you are using. This is the final step of
adding new hardware. See Chapter 4 for more details.
5. Set up the address (with dipswitches) and IRQ (jumpers) on the
serial card to reflect unused addresses and IRQ’s that you want
to use. The address dipswitch setting consists of configuring
seven dipswitches that reflect a particular hex address. The IRQ
is set via a little black jumper. See Chapter 4 for an explanation
of address and IRQ settings as well as details on configuring the
card itself.
6. Set serial card hardware jumpers for the communication
parameters that you desire. See Chapter 5 for an explanation of
serial parameters and details on how to configure them.
7. Shut down the PC before installing the serial card.
8. Install ISA serial card into an available ISA slot in the PC.
9. Physical Hook-up and Troubleshooting – pinout, cable data, and
troubleshooting information. See Chapter 6 for more details.