Hardware
Overview
8
Manual Documentation Number: PES1A/PESV1A-2907m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 –
www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 –
www.bb-europe.com
Connecting the Hardware
Typically, the PES1A/PESV1A is connected to a network via a hub, switch
or router using standard CAT-5 cable. Power must be supplied to the
converter via the CAT-5 cable using Power over Ethernet. Configuration is
accomplished over the network, or via a direct connection (see below) using
the Web Configuration and Management Interface
Power over Ethernet (PoE)
Power is supplied to your PES1A/PESV1A from PoE power source
equipment (PSE), which must be installed within 100 meters of the
converter. PSEs may be endspan or midspan devices. Endspan PSE devices
may be switches or hubs with integrated PoE capability. Midspan PSE
devices are dedicated, inline devices that are installed between your network
switch and the PES1A/PESV1A.
For more information on PoE see Appendix C.
Serial Device
PC
PC
PES1A
or
PESV1A
Serial Cable
* Must be w ithin 100 ft of the PES1A/PESV1A
Endspan PoE
Switch or Hub*
Figure 6.
Connection using Endspan Power Source