Managing the PES1A/PESV1A
28
Manual Documentation Number: PES1A/PESV1A-2907m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 –
www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 –
www.bb-europe.com
Changing the Root Username and Password
You may want to change the Root username and password after you have
gained access to the Web Configuration and Management Interface. To
change your username and password click
Users
under the
Configuration
menu. Follow the prompts to enter a new username and password. Click
Apply
to complete the procedure.
Adding New Users
The root user of the PES1A/PESV1A (using the default username and
password) has complete administrative rights, including access and control of
all configuration parameters. As administrator you can add other users and
configure the specific rights of each.
Non-administrators can also set up new users, access and permissions (if they
have permission) but a user cannot set another user’s permission level higher
than their own permission level, nor can a user raise their own permission
level.
1.
In the
Configuration
menu, click
Users
. The
User Configuration
page appears.
2.
Click
New
. The
Add New User
page appears.
3.
Type a new username in the
New Username
box.
4.
Type a new password in the
New Password
box. The characters
you type will be masked by asterisks.
5.
Type the new password again in the
Confirm Password
box. The
characters you type will be masked by asterisks.
6.
Click
Apply
. After a short delay a message box appears at the top of
the page announcing, “
Changes have been saved successfully.
”
Configuring User Access and Permissions
1.
In the Configuration menu, click
Users
. The
User Configuration
page appears.
2.
Click the username to be configured. The
User Configuration –
Username
page appears. To change the username or password,
make the changes under
User Configuration
and click
Apply
.
