2
Configuration Instructions
McBasic-Gigabit has user-configurable features located on the PCB board. Please
refer to the board diagram and the table for available features.
To access the McBasic-Gigabit board for configuration, loosen the two screws on
the front of the unit. Slide the board out of the enclosure (faceplate is attached).
Configure, then slide the board back into the enclosure and tighten the screws.
Following is the McBasic-Gigabit PCB board used to configure the unit.
McBasic-Gigabit w/LFPT
DIP Switch on
S1
Feature
Default Setting
1
Forced/Preferred
ON
2
Factory use - Do not change
ON
3
TX LinkLoss
OFF
4
FiberAlert
OFF
5
FX Auto Negotiation
ON
6
FX LinkLoss
OFF
7
Factory use - Do not change
OFF
Содержание McBasic-Gigabit
Страница 1: ...McBasic Gigabit With LFPT Operation Manual...
