background image

13

 

Safety Certifications 

  UL/CUL:   Listed to Safety of Information Technology Equipment, including 

Electrical Business Equipment. 

 

CE:   The products described herein comply with the Council Directive on 

Electromagnetic Compatibility (2004/108/EC) and the Council 
Directive on Electrical Equipment Designed for use within Certain 
Voltage Limits (2006/95/EC).  Certified to Safety of Information 
Technology Equipment, Including Electrical Business Equipment.  
For further details, contact B&B Electronics. 

 

 

 

 

 

 

European Directive 2002/96/EC (WEEE) requires that any equipment that bears 
this symbol on product or packaging must not be disposed of with unsorted 
municipal waste.  This symbol indicates that the equipment should be disposed 
of separately from regular household waste.  It is the consumer’s responsibility to 
dispose of this and all equipment so marked through designated collection 
facilities appointed by government or local authorities.  Following these steps 
through proper disposal and recycling will help prevent potential negative 
consequences to the environment and human health.  For more detailed 
information about proper disposal, please contact local authorities, waste 
disposal services, or the point of purchase for this equipment. 

 

 

Class 1 Laser product, Luokan 1 Laserlaite,  
Laser Klasse 1, Appareil A’Laser de Classe 1 

Содержание McBasic-Gigabit


















Отзывы: