background image

16

 

Electrostatic Discharge Precautions 

Electrostatic discharge (ESD) can cause damage to any product, add-in modules or 

stand alone units, containing electronic components.  Always observe the following 

precautions when installing or handling these kinds of products 
1.

 

Do not remove unit from its protective packaging until ready to install. 

2.

 

Wear an ESD wrist grounding strap before handling any module or component.  

If the wrist strap is not available, maintain grounded contact with the system unit 
throughout any procedure requiring ESD protection. 

3.

 

Hold the units by the edges; do not touch the electronic components or gold 

connectors. 

4.

 

After removal, always place the boards on a grounded, static-free surface, ESD 

pad or in a proper ESD bag.  Do not slide the modules or stand alone units over 

any surface. 

 

WARNING!

  Integrated circuits and fiber optic components are 

extremely susceptible to electrostatic discharge damage.  Do not 
handle these components directly unless you are a qualified service 

technician and use tools and techniques that conform to accepted 

industry practices. 

17

 

Safety Certifications 

UL/CUL:  Listed to Safety of Information Technology Equipment, including Electrical 

Business Equipment. 

 

       

                 

 

 
 
 
 
 
European Directive 2002/96/EC (WEEE) requires that any equipment that bears this 

symbol on product or packaging must not be disposed of with unsorted municipal 

waste.  This symbol indicates that the equipment should be disposed of separately 

from regular household waste.  It is the consumer’s responsibility to dispose of this 
and all equipment so marked through designated collection facilities appointed by 

government or local authorities.  Following these steps through proper disposal and 

recycling will help prevent potential negative consequences to the environment and 
human health.  For more detailed information about proper disposal, please contact 

local authorities, waste disposal services, or the point of purchase for this equipment. 

 

Class 1 Laser product, Luokan 1 Laserlaite,  
Laser Klasse 1, Appareil A’Laser de Classe 1

Содержание iMcV-DS3












Отзывы: