background image

Installation and Operations Manual 

— Model 400E Series 

 

26 

B&B ARMR

                                                                                                                  

A Division of B&B Roadway and Security Solutions                                                                                                 0400E-9001 Rev J 

 

7. WARRANTY 

BBRSS  warranties  for  a  period  of  one  (1)  year  FOB  manufacturing  facility,  unless 
otherwise  specified  by  BBRSS  in  writing,  from  defects  due  to  faulty  material  or 
workmanship.  Damage due to handling during shipment and installation are not covered 
under warranty.  BBRSS assumes no responsibility for service at customer site.  BBRSS 
is  in  no event  responsible for  any labor costs under the  warranty.  Subject  to  the above 
limitation,  all  service,  parts,  and  replacements  necessary  to  maintain  the  equipment  as 
warranted shall be furnished by others.  BBRSS shall not have any liability under these 
specifications, other than for repair or replacement as described above for faulty product 
material  or  workmanship.    Equipment  malfunction  or  equipment  failure  of  any  kind, 
caused  for  any  reason,  including,  but  not  limited  to  unauthorized  repairs,  improper 
installation, installation not performed by BBRSS authorized personnel, incoming supply 
power  is  outside  the  tolerance  for  the  product,  failure  to  perform  manufacturer’s 
suggested  preventative  maintenance,  modifications,  misuse,  accident,  catastrophe, 
neglect, natural disaster, are not under warranty. 
 
The  exclusive  remedy  for  breach  of  any  warranty  by  BBRSS  shall  be  the  repair  or 
replacement  at  BBRSS’s  option,  of  any  defects  in  the  equipment.   

IN  NO  EVENT 

SHALL BBRSS BE LIABLE FOR CONSEQUENTIAL OR SPECIAL DAMAGES 
OR  ANY  KIND  OF  PERSONAL  DAMAGES.

    Except  as  provided  herein,  BBRSS 

makes  no  warranties  or  representations  to  consumer  or  to  anyone  else  and  consumer 
hereby  waives  all  liability  against  BBRSS  as  well  as  any  other  person  for  the  design, 
manufacture, sale, installation, and/or servicing of the Products. 
 

THE  FOREGOING  WARRANTIES  ARE  IN  LIEU  OF  ALL  OTHER  WARRANTIES  EXPRESS 
OR  IMPLIED,  INCLUDING  THE  IMPLIED  WARRANTY  OF  MERCHANTABILITY  AND 
FITNESS FOR A PARTICULAR PURPOSE.  NO OTHER WARRANTIES EXIST. 
 

Any modification or alteration by anyone other than BBRSS will render the warranty 
herein as null and void. 
 

Содержание 4X0E Series

























Отзывы: