Bandai Namco JUMBO JUMPIN', Руководство оператора

Страница: 8 / 16

Jumbo Jumpin’ 
Operators Manual
OPTION MENU
Enter the options menu by pressing the “MENU” button located on the service panel inside
the coin door. Advance through all options by pressing the “TEST” BUTTON. Increase
displayed values with your foot by stepping on the right side of the mat. Reduce values
using your foot by stepping on the left side of the mat..
The Game options include the following choices:
1- GAME VOLUME This sets the volume for when a game is being played. Setting
it to “1" is the softest and “10" is the loudest. (Default setting is “ 8 ")
2- ATTRACT VOLUME This sets the volume of the music that plays during the
attract mode. The range is “OFF”, “1” is the softest and “10" is the loudest. (Default
setting is “5")
3- COINS TO START PLAY This option determines how many coins (pulses on the
COIN #1 input) will start a game. The range is “FREE PLAY”, 1 – 8. The default
value is “1” and is typical for card reader systems. The Free play setting is for
demonstration and trade shows. Free play games start when a player stands in the
jump zone. Any tickets awarded during free play display as normal, but will not be
dispensed.
4- COIN #2 VALUE The second coin input can be set to a higher value in multiples of
coin #1. For example: Let;s say you want to accept quarters ($0.25) as coin #1
and dollars ($1.00) as coin #2. Setting the COIN #2 VALUE to 4 tells the game that
each pulse on the coin #2 input = 4 pulses on the coin #1 input. This helps make
the coin counter work properly using different coin values. The range is “OFF”, 1 –
8. The default setting is “1” (coin 2 = coin 1 value). The OFF setting can be
selected if the coin #2 input is not used.
5
5- MONEY PROMPT This option tells the player the type of money accepted. The
options are: COINS, TOKENS, SWIPE CARD, INSERT CARD. The default setting
is SWIPE CARD.
6- WARM UP JUMP COUNT This sets the number of warm up jumps a player gets
before the game can end. The range is 1 – 9 (Default setting is “7”)
7- STATION ID This option is used to identify more than one game. The range is 0 – 1
(default setting = 1). Zero identifies the master (or standalone) unit and one
identifies the slave unit. Up to two games can be connected together.
IMPORTANT NOTE: no two games should be set to the same STATION ID.