Page
7
436 M1 01 C
5. FRONT PANEL
“ENTER”
key
To change the step displayed menu.
At the last step, it comes back to the
first line.
“MENU - ”
key
To move the cursor during configuration.
At the last digit, comes back on the first one.
“MENU +”
key
To go to the next menu.
Pushing simultaneously both keys
“
MENU +”
and
“ENTER”
allows a fast return to measurement display.
“VALID”
key
To save the parameters on EPROM
when it asks:
VALIDATION ?
Caution, when you press this key,
all parameters are saved.
(previous data programmation
will be overwrited).
If you are not sure of any modification,
do not press the VALID key,
To change parameters of data capture:
Numéric input increase the
flashing digit (loop 0 after 9).
Reverse the choice Yes / No,
Up/Down, 0-20 mA / 4-20 mA etc.
To go to the next display or to change a value.
S1, S2, S3, and S4
indicate relays status:
LED lighting = contact ON
LED OFF = contact OFF
LED flashing = Timer in use
2 lines /16 alphanumeric characters
9.22 mm high - Back lighted
Key
“A”
To display the parameters of upper line.
(main BAMOPHOX)
Key
“B”
To display the parameters of lower line.
(Extension blind BAMOPHOX)
