BALZER ELIMINATOR VACUUM TANK Series, Руководство пользователя

Страница: 10 / 58

6 Eliminator Vacuum Tank (Tandem) User Manual
SAFETY
The following Safety Alert Symbols mean ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! They stress an
attitude of “HEADS UP FOR SAFETY” and can be found throughout this manual and on the equipment itself .
BEFORE YOU ATTEMPT TO OPERATE, MAINTAIN, OR SERVICE THIS EQUIPMENT, READ AND STUDY THE FOLLOWING
SAFETY INFORMATION IN ADDITION, MAKE SURE THAT EVERY INDIVIDUAL WHO OPERATES, WORKS WITH, OR
OTHERWISE USES THIS EQUIPMENT IS FAMILIAR WITH THESE SAFETY PRECAUTIONS
Our company ALWAYS takes operator safety into consideration when designing its machinery, guards, and exposed moving
parts for operator protection . However, some areas can NOT be guarded or shielded in order to assure proper operation . In
addition to this manual, decals on the machine warn of further danger and should be read and observed closely .
READ and FOLLOW the instructions on all decals .
REMEMBER it is the owner’s responsibility for communicating all information on the safe use and proper maintenance of this
machine! This includes providing understandable interpretation of these instructions for operators who are not fluent in reading
or understanding English .
CAUTION
CAUTION indicates a potentially hazardous
situation which if not avoided may result in minor
to moderate injury or minor to moderate damage
to the machine.
DANGER
DANGER indicates an imminently hazardous
situation which if not avoided will result in serious
injury or death or irreparable damage to the
machine.
WARNING
WARNING indicates a potentially hazardous
situation which if not avoided may result in serious
injury or death or moderate to severe damage to
the machine.
Mandatory Safety Shutdown Procedure
BEFORE cleaning, adjusting, lubricating, or servicing this equipment:
1 . Remove the ignition key from the power unit engine .
2 . Make sure ALL movement throughout this equipment has ceased! ONLY when you have taken these precautions can
you be sure it is safe to proceed . Failure to follow the above procedure may lead to serious injury or death .
3 . Properly attach the jack to this equipment and raise up to transfer weight to the jack .
4 . Keep the hitch pin attached to help prevent this equipment from moving .
5 . Disconnect the PTO shaft from the power unit .