Balzano EK-3068, Руководство по эксплуатации

Страница: 9 / 14

B. OFF button program
：（
Same with standby status of get powered.)
Press “OFF” button when the machine is in working status, no lamps inside this
button, the machine will get back to standby status. 2 LED digital display indicates
“00”.
C. REV button program
：
When squeezing not smoothly or block up, press REV button back gently and do
not release. The screw begin to reverse, loosen button and it will stop reverse. The
LED lamp in this button is lasting bright in green color. Other green indicating
lamps are not bright. Then, the 2 LED digital display starts counting. It counts in
seconds for the first minute. After being indicated “60”, the digital display resets
and counts in minutes. The maximum timer interval is 5mins. It will exit the program
after counting 5mins continuously, and revert to standby status. Loose the button,
the machine revert to standby status, 2 LED digital display indicates “00”.The green
lamp inside will be turned off.
D. LED digital display
：
In ON and REV program, the LED digital display counts in seconds for the first
minute. After being indicated “60”, the digital display resets and counts in minutes.
The maximum timer interval is 15mins.
E. Operations in case of blocked up:
1. When squeezing not smoothly or block up, press reverse button back gently and
do not release for seconds. The screw begin to reverse, loosen button and it will
stop reverse. Press "ON" button and it will get right to work continuously again.
NOTE: REV button is the inching button.
2. If by pressing REV button doesn’t work, power off and take out the food which
causes block, reinsert the power and try again followed with instructions.
F. Disassemble and Clean
1.
Please turn off the power, and then take off the plug before disassemble.
2. Please follow the assembling guide from the opposite direction when disassemble
the machine. (See Fig5
，
Fig4, Fig3, Fig2, Fig1). When having difficulties to
disassemble the squeezing screw, you can get it out together with the juice
container or press REV button for 2-5 second, then, take it off.
3. Clean all the parts except the main engine in warm water with detergent. Use
the brush to clean and dry them with cloth. If the filter is difficult to get clean,
use the brush, and softly get it clean.