OSCILLATING JACK
ADJUSTMENT OF FIRST STAGE AIR DUMPER POSITION
•
To increase the flow rate, turn ring nut (3) anticlockwise using
the counter wrench on the body (1) of the jack to avoid putting
excessive stress on the eyelet pin (9).
•
This operation lowers the body (1) and favours the opening of the
first stage air damper (7).
•
To decrease the air flow rate, turn ring nut (4) clockwise, using
always the counter-wrench on the body of the jack.
•
In this case, the body (1) move upwards and favours air damper
closing (7).
•
Once the first stage air regulation is complete, lock the two ring
nuts (4) and (5).
ADJUSTMENT OF SECOND STAGE AIR DUMPER POSI-
TION
•
Loosen lock nut (6).
•
To increase second stage flow rate, undo the screw (5) so as to
lengthen the hydraulic piston stroke. Perform the operation in the
reverse order to reduce it.
•
After second stage air flow adjustment is completed, tighten nut
(6).
DANGER / ATTENTION
To avoid damaging the eyelet (9), carry out all the adjustment
operations with wrench and counter-wrench.
0002935420
9
1
2
3
4
6
5
7
8
30 / 44
0006081053_202301
ENGLISH
Содержание TBL 360P
