baltur BT 75 DSPG, Инструкция по техническому обслуживанию, эксплуатации и установке, Страница: 12 / 92

E
N
G
L
I
S
H
12 / 32
98319_200910
N° 0002901120
rev.: 19/02/2002
N° BT 8666/3
DIAGRAM OF PIPES OF FEED SYSTEM FOR LIGHT OIL BURNERS WITH MAXIMUM
NOMINAL VISCOSITY (5 °E at 50 °C)
The combustible recovery and degasifier tanks (diameter ~ 150, height ~ 400) should be installed as near as possible to the
burner and should be about 0,5 m. higher with respect to the burner's pump.
FUEL FEEDING HYDRAULIC DIAGRAM FOR ONE OR MORE LIGHT OIL BURNERS
WITH MAXIMUM NOMINAL VISCOSITY (5 °E at 50 °C) FROM 75 TO 300 DSPG
The combustible recovery and degasifier tanks (diameter ~ 150, height ~ 400) should be installed as near as possible to the burner
and should be about 0,5 m. higher with respect to the burner's pump.
1 Main cictern
2 Filter
3 Circulation pump
4 Water and system drain
6 Fuel recovery and degasifier
7 One-way valve
8 By-pass (usually closed)
9 Feeding circuit presure regulator
adjustment range between 0.2 and 1 bar
10 Pressure gauge (0 - 4 bar)
1 Main cictern
2 Filter
3 Circulation pumps
4 Water and system drain
5 Air-gas drain usually closed
6 Fuel recovery and degasifier
7 One-way valve
8 By-pass (usually closed)
AL
BRUCIA
TORE
AL
BRUCIA
TORE
AL
BRUCIA
TORE