Vertex™ Evaporative Condenser Rigging & Assembly Instructions
– Optional Accessory Installation
Page | 17
Figure 16. Platform Assembly Offset
3.
Begin joining the platform sections by offsetting the sections from each other as shown in
Figure 16
.
4.
Slide the platforms until the crossmember cutout is aligned with the crossmember of the second section. Then slide the
two sections together until the support beams are aligned, and the crossmember is seated into the cutout. See
Figure
17
.
5.
Slide the two splice plates into mounting positions. Secure with provided hardware. See
Figure 18
,
Figure 19
and
Figure 20
.
Figure 17. Platform Assembly Alignment
Figure 18. Move splice plates into positions shown
