Baltimore Aircoil Company FXV3, Инструкции по монтажу и сборке

Страница: 13 / 91

FXV3/CXVT Rigging & Assembly Instructions – Unit Rigging & Assembly
Page | 13
Section Assembly
NOTICE : For weight information, refer to the submittal drawing package. Any motors or accessories shipped in
the cold-water basin must be removed prior to installing the upper (mechanical and coil casing) section.
1. Remove any accessories shipped in the cold-water basin.
2. Position the lower section on the unit supports and bolt in place. Refer to Figure 3 on Page 12 and Anchoring on Page 8 .
3. Wipe moisture and dirt from the perimeter flange and plenum step as shown in Figure 4.
4. Apply flat butyl sealer tape (BAC part #554000) across the entire plenum step seal as shown in Figure 5 .
a. Refer to critical seal area shown in Figure 4 and detailed in Figure 7 .
5. Apply a 2” x 2” piece of flat butyl sealer tape to the corner rigging guides as shown in Figure 4 and detailed in Figure 6 .
6. Apply flat butyl sealer tape around the entire perimeter of the lower section. Align the tape on the perimeter flange as shown in Figure 8 .
See Figure 6 and Figure 7 for critical sealing areas, allow 1” overlap tape at these locations.
Figure 5. FXV3 and CXVT Lower Section
Plenum Step Seal