INST
ALLA
TION
7. Check adjustment of the (3) tilt switches (normally open).
a. Slam switch on front door.
b. Slam switch on bottom right side of cabinet.
c. Plumb bob tilt switch on left side of cabinet.
NOTE: Game should be placed on desired location and leg levelers adjusted before setting plumb bob
tilt switch.
8.
Check power supply for any foreign material shorting across components.
9. Check location line voltage and adjust power supply to suitable value.
TO ADJUST POWER SUPP LY:
Insert correct "line code" plug into receptacle on power supply chassis to match power input available,
as shown in Figure 1. Games are normally supplied with two plugs, one wired for 120 VAC and the other
for 220 VAC operation. Figure 2 shows wiring of "line code" plugs.
ALL
RED
ALL
YELLOW
WIRE
115 V.A.C.
120 V.A.C.
220 v.A.C.
2 �O V. A. C.
00
FIGURE 2
8
