MK2A-CINEV-0001 [B]
3 - 1
CineVision™ Installation and Maintenance
C
o
p
yrigh
t
2006 B
al
ly G
amin
g, I
n
c. Al
l Ri
gh
ts
R
es
er
ved.
Chapter 3
Relocating the Cabinet
Relocate a Machine
Use the following instructions to relocate a machine:
STEP 1.
Ensure the new location has appropriate power and network cabling installed.
STEP 2.
Flip the µ-ATX power switch off to power off the logic board.
STEP 3.
Press the cabinet switch to power off the cabinet components.
STEP 4.
Press the main power switch to power off the system.
STEP 5.
Unplug and remove the power and network cables.
STEP 6.
Place the machine at the desired location. Do
not
place the machine on any wires or cables.
STEP 7.
To remove the machine from service, stop here.
To relocate and restart the machine, go to the next step.
STEP 8.
Open the cabinet door and verify that no cables are pinched at any location.
STEP 9.
Securely fasten the machine to the wall, floor, or adjacent object.
STEP 10. Connect and route the power and network cables through the cut-out provided at the left,
right, or rear as appropriate for the floor plan.
STEP 11. Press the main power switch to supply power to the cabinet.
NOTE:
Changes in floor configuration may require rerunning power and Category 5
network cables.
