Chapter 2: Installation
CineVision™ Installation and Maintenance
2 - 2
MK2A-CINEV-0001 [B]
Installation Instructions
C
o
p
yrigh
t
2006 B
al
ly G
amin
g, I
n
c. Al
l Ri
gh
ts
R
es
er
ved.
Unpacking and Inspecting the Machine
Use the following instructions to unpack and inspect the machine:
STEP 1.
Remove any plastic packaging.
STEP 2.
Verify that the serial numbers on the cabinet match the shipping documents associated with
the installation.
STEP 3.
Inspect the cabinet for any shipping damage, such as broken glass, dents, or scratches.
STEP 4.
Inspect the corners of the glass panels carefully.
STEP 5.
Unpack and remove all loose parts from any boxes or bags containing cables, lock cams, and
mounting hardware.
STEP 6.
Remove all plastic or paper packing materials from any interior assemblies, such as a printer.
STEP 7.
Inspect the interior cables and ensure they are firmly connected.
STEP 8.
Inspect the circuit board assemblies and CompactFlash® for loose connections and ensure they
are firmly attached. See
Reseating Operating System (OS) and Game Software
STEP 9.
If there is damage to the machine or there are any missing parts, then contact your Bally
Technologies Distributor or Customer Service Representative for Return Merchandise
Authorization (RMA) information.
TIP:
To prevent damage to the front of the machine, remove the packaging while standing
at the back of the machine. If any marks are made on the back of the cabinet while
opening the packaging, then use shoe polish to minimize the appearance of marks.
CAUTION:
Serial numbers on the cabinet must match the shipping documents that are
associated with the installation. Never remove serial numbers from any Bally
equipment.
TIP:
During shipping, cables may become disconnected and circuit boards may become
unseated. Ensure they are firmly attached before proceeding.
