Balluff BTL7-A/C/E/G501-M P-S32/S115/KA Series, Руководство пользователя

Страница: 37 / 146

www.balluff.com 11 english
4.4 Electrical connection
Depending on the model, the electrical connection is made
using a cable or a connector.
The connection or pin assignments for the respective
version can be found in Tables 4-3 and 4-4.
Note the information on shielding and cable
routing on page 12.
4.4.1 Connector S32/cable connection KA_ _
S32
Pin
KA
Wire color
BTL7-… interface
Fig. 4-9: Pin assignment of S32 connector
(view of connector pins of BTL)
-A501 -G501 -C501 -E501
1 YE yellow Not used
1)
output 1
0…20 mA
2)
4…20 mA
2)
2
GY gray 0 V
3 PK pink
output 2
10…0 V
2)
10…–10 V
2)
20…0 mA
2)
20…4 mA
2)
4 RD red
La (communication line)
5 GN green
output 1
Not used
1)
0…10 V 2) –10…10 V 2)
6 BU blue GND
3)
7 BN brown 10…30 V
8 WH white Lb (communication line)
Tab. 4-3: Connection assignment BTL7-…-S32/KA_ _
4.4.2 Connector S115
S115
Pin
BTL7-… interface
Fig. 4-10: Pin assignment of S115
connector (view of connector
pins of BTL)
-A501 -G501 -C501 -E501
1 0 V (pin 3)
2 0 V (pin 5)
3
output 2
10…0 V
2)
10…–10 V
2)
20…0 mA
2)
20…4 mA
2)
4
La (communication line)
5
output 1
0…10 V
2)
–10…10 V
2)
0…20 mA
2)
4…20 mA
2)
6 GND
3)
7 10…30 V
8 Lb (communication line)
Tab. 4-4: Connection assignment BTL7-…-S115
4
Installation and connection (continued)
1)
Unassigned leads can be connected to the GND on the controller side but not to the shield.
2) Factory setting, can be freely configured with the PC software.
3)
Reference potential for supply voltage and EMC-GND.
BTL7-A/C/E/G501-M _ _ _ _ -P-S32/S115/KA _ _
Magnetostrictive Linear Position Sensor – Profile Style