Balluff BOD 21M-LBI05-S4, Руководство пользователя

Страница: 33 / 70

Photoelectric Sensors
Laser distance sensor with IO-Link and additional functions
BOD 21M-LBI05-S4
9 english www.balluff.com
Sensor function principle and Teach-In of the
switchpoints through IO-Link (continued)
8.
Save and apply switchpoint SP1 and SP2: Send
system command 0x40 to the sensor.
Access Index Value Meaning
W 0x0002 0x40 Teach Apply
9. Check whether SP1 and SP2 were successfully taught:
Read out and check the parameter Teach-In Status
using Index 0x003B.
Access Index Value Meaning Result
R 0x003B 0x03 SP12
successfully
applied
Teach State
= SP12
SUCCESS
Teach-In
ended
suc-
cessfully
0x07 Teach State
= Error
Go to
step 3
Sensor principle: background evaluation
The background is taught. Objects in front of the
background are detected. This allows for example
reflective objects to be reliably detected against a
background.
Fig. 11:
SSC1/SSC2
SP1
TP1
Single Point Mode, background evaluation
Teach-In background evaluation Single Point Mode
Procedure in IO-Link mode:
1.
Align sensor with the background
2.
Select Teach-In channel:
Access Index Value Meaning
W 0x003A 0x00 Standard SSC1
W 0x003A 0x01 SSC1
W 0x003A 0x02 SSC2
Sensor function principle and Teach-In of the
switchpoints through IO-Link (continued)
3.
Teach point (TP1 for SP1). Send system command
0x41 to sensor.
Access Index Value Meaning
W 0x0002 0x41 SP1 Single Value
Teach
If the red LED comes on, TP1 could not be taught
(alignment is unsuitable or the background is outside
the detection range).
4.
Verify whether TP1 has been taught successfully:
Read out and check the parameter Teach-In Status
using Index 0x003B.
Access Index Value Meaning Result
R 0x003B 0x14 TP1 was
successfully
taught
Teach State
= WAIT FOR
COMMAND
Go to
step 5
0x07 Teach State
= Error
Go to
step 3
5. Save and apply switch point SP1:
Send system command 0x40 to sensor.
Access Index Value Meaning
W 0x0002 0x40 Teach Apply
6.
Verify whether SP1 has been taught successfully:
Read out and check the parameter Teach-In Status
using Index 0x003B.
Access Index Value Meaning Result
R 0x003B 0x01 SP1 successfully
applied
Teach State
= SP1
SUCCESS
Teach-In
ended
suc-
cessfully
0x07 Teach State
= Error
Go to
step 3