Balluff Network Interface / IO-Link
www.balluff.com
11
4
Configuration Overview
Configuration
of the
Extension Port
Following devices can be connected to the Extension Port
Configuration
Use Case
Device alone
(Extension Port not active)
Device with
same Device
Device with BNI IOL-751-V08-K007
Device with BNI IOL-751-V10-K007
Device with BNI IOL-751-V13-K007
The device which is connected to the Extension Port is called as “Second Device” in this
manual.
Note
The "Factory reset" command does not affect the configuration of the extension port
in any way.
Note
The process data length depends on the configuration.
The configuration of the extension port can be performed via the parameter 0x55.
If the data storage or the validation is used, it must be configured on the validation
(compatible). Depending on the system, the device ID has to be entered (table parameter
data) or the device ID is read out from the IODD.
