www.balluff.com
19
6
Configuration via Explicit Messages
QuickConnect
The QuickConnect function makes it faster to boot up and integrate the BNI EIP-50x-105-
X015 modules.
Enabling QuickConnect automatically takes over all necessary port properties on the module:
Static IP address
Ports at 100 Mbps full-duplex
Auto-negotiation disabled
Auto MDI-X disabled
Prepared for linear topology
You can configure
QuickConnect
via the following
class instance attribute of the explicit messages:
Class
Instance
Attribute
Value
245 (0xF5)
1 (0x01)
12 (0x0C)
0: disabled (default)
1: enabled
Note
For QuickConnect to be enabled, ACD (Address Conflict Detection) must also be
enabled. This is switched on by default.
The
ACD
can be reviewed and changed using the following class instance attributes of the
explicit messages:
Class
Instance
Attribute
Value
245 (0xF5)
1 (0x01)
10 (0x0A)
0: disabled
1: enabled
(default)
Overview of the QuickConnect classes and connection time:
BNI EIP-50x-105-x015 HW 5 SW 3.2-3.4:
QuickConnect Class B, connection time 1 second
BNI EIP-50x-105-x015 HW 6 SW 3.5:
QuickConnect Class B, connection time 450 milliseconds
