www.balluff.com
35
8
Display
8.10.
Module Infor-
mation
•
Briefly pressing the arrow key allows scrolling through the "Module information"
menu.
•
The product name, module updates and Mac-ID are displayed as information.
8.11.
General Infor-
mation
•
Press and hold the arrow key to scroll quickly in editing mode.
•
If no key is pressed for 10 seconds, the view reverts to the standard display (4th
octet of the IP address). Changes that have not been saved will be lost.
•
Differences between the new configuration and the configuration with which the
module works are indicated by an unequal sign. In this case, the screen switches
to the standard display after 5 seconds.
•
The display flashes in editing mode. The display flickers in fast scroll mode.
•
If the module receives a single ping, the word "Ping" appears on the display for a
couple of seconds. Then the previous display returns. You can exit ping mode
sooner by briefly pressing the Set key.
•
If the module receives two or more pings, the word "Ping" appears on the display.
You can exit the display only by briefly pressing the Set key. Then the display be-
fore the ping returns.
•
The LED function of the display LEDs can be set in a user-specific manner by set-
ting several bits in the process data outputs. (see bit layout, standard output data)
•
The plc lock function can also be used by setting a bit in the process data outputs.
(see bit layout, standard output data)
Note:
You cannot select editing mode in the display if the plc lock is set in the process
data inputs by a bit (see bit layout, standard output data)
BNI
EIP-508-
105-R015
Version
SW: x.x
HW: x.x
MAC ID
XX : XX : XX :
XX : XX : XX
