Balluff BIS U-870, Техническое описание, Руководство пользователя

Страница: 8 / 29

Handheld Programmer
BIS U-870
8
3.1 Battery operation
Changing
rechargeable
batteries and
operating life
Charging
rechargeable
batteries
Note
The system components of the Handheld Programmer are powered by a 3.7 V
rechargeable battery pack (Li-Ion).
Please charge rechargeable batteries provided by Balluff before using them for the
►
first time!
Fig. 1: Connecting the power supply – Charging the battery pack
A high-capacity rechargeable battery has a battery life of up to 48 hours after a full charge.
Prerequisite: 200 read/write operations, after 3 minutes without being used, the device enters
Suspend Mode. Data in the Handheld Programmer are retained for at least 10 to 15 minutes
while the battery is being replaced.
Note
User data are saved by default in a RAM-based folder. The data in this RAM folder are
lost if the main battery pack and backup battery pack are completely drained or if the
device is restarted cold ( see also „Cold Reset“, Section 3.3 on page 9 ). The safest
place to store the data is an SD or MMC memory card (flash disk).
Attention!
Components can be damaged by using an incorrect charging current.
Use the docking station or the Balluff-recommended charger/power supply for
►
charging the battery pack.
Insert the device into the docking station or connect the power supply ►
Note
When using a docking station, an uncharged battery pack may be inserted. Then
simply dock the unit and turn it on.
Getting Started
3