Balluff BIS U-870, Техническое описание, Руководство пользователя

Страница: 22 / 29

Handheld Programmer
BIS U-870
22
Read or write
error
5.4 Working with files
Saving files
Loading files
Exporting Read
ID
Note
If reading a data carrier or writing to the memory of a data carrier was not successful,
the „Operate“ field illuminates red. Make certain that there are no objects between
the handheld device and the data carrier and restart the read or write operation.
Note
Data read from a data carrier can be saved under a file name. Already saved data can
be opened and further processed.
Data from the R/W tab can be saved.
Switch to the
►
„File Browser“ tab.
Click the
► [Save]
button.
The
⇒
„Save as…“ dialog opens.
Select storage location and file name and ►
confirm with [OK] .
The data that were read are saved as a ⇒
„.bis file“.
To open a saved file, click the
►
[Open]
button.
The
⇒
„Open file…“ dialog opens.
Select file and confirm with ► [OK] .
The loaded data are displayed on the
⇒
„R/W“ tab below the [Write] button.
Figure 17: „File Browser“ tab
To export the read ID data from the information window in ► the „Read ID“ tab, click the
[Export] button.
The ⇒ „Save as…“ dialog opens.
Select storage location and file name and confirm with
►
[OK] .
The data that were read are saved as a „.bis file“. ⇒
Note
All data records on the
„R/W“
tab are saved in the file with data type and number of
bytes ( see also „Files“ on page 18 ).
User data are saved by default in a RAM-based folder. The data in this RAM folder are
lost if the main battery pack and backup battery pack are completely drained or if the
device is restarted cold ( see also „Cold Reset“, Section 3.3 on page 9 ). The safest
place to store the data is an SD or MMC memory card (flash disk).
Operation
5