3.2 Non-approved Use
Warranty and liability claims against the manufacturer are rendered
void by:
–
Unauthorized tampering
–
Improper use
–
Use, installation or handling contrary to the instructions provided
in this User's Guide.
–
The sensor is not permitted to be used as a mechanical stop.
–
Measures must be taken against the foreseeable defeating of the
interlocking device (see DIN EN ISO 14119).
3.3 Personnel Requirements
Installation and startup are to be performed only by skilled
professionals. The specifications contained in this user's guide as
well as the prevailing standards and directives must be followed.
Skilled professionals are persons who are familiar with the work
such as installation and the operation of the product and have the
necessary qualifications for these tasks.
3.4 Obligations of the Operating Company
Follow the instructions in the user's guide.
–
Improper use may result in malfunction of the device. Equipment
damage and/or personal injury during operation may then result.
Therefore observe all instructions for installation and handling of
the device as described in this document. Observe the safety
instructions for operation of the overall system.
–
Non-observance of instructions and standards, especially for
manipulation and/or changes to the device will result in loss of
liability and warranty.
–
If the sensor is damaged the safety function can no longer be
guaranteed.
–
Errors caused by damage cannot be detected by the sensor.
14
BES M…-D11 Inductive Safety Sensors
Courtesy
of
CMA/Flodyne/Hydradyne
▪
Motion
Control
▪
Hydraulic
▪
Pneumatic
▪
Electrical
▪
Mechanical
▪
(800)
426-5480
▪
www.cmafh.com
