Balluff BDD 750 P Series, Руководство пользователя, Страница: 6 / 36

6
2.
Introduction
The display device is designed for panel mounting. It is universally applicable, with its intuitive operation
and the extensive features.
2.1. Operation mode
All functions are can be configured in the parameter menu.
The device can be set to one of the following operation modes:
•
DISTANCE (Distance measurement)
The scaling (setting of the display unit) is set with the parameter FACTOR and DIVIDER. When
measuring the distance, the default setting (FACTOR = 1, DIVIDER = 1 and DECIMAL POINT = 3)
corresponds to a position display in the unit "mm" in the following display format: "00000.000" mm.
For example, to display a position in "inch" with three decimal places as well, the parameter
FACTOR must be set to 10 and the parameter DIVIDER to 254. The unit "inch", which is to be
displayed in the display, is set in the parameter SCALE UNITS.
•
ANGLE (Angle Measurement)
For angle measurement, the default setting (FACTOR = 1, DIVIDER = 1, and DECIMAL POINT = 3)
corresponds to an angle display of 0
– 360 degrees with three decimal places.
With the parameter LENGTH PER REVOLUTION, the distance travelled is set per 360 degrees (in
millimeters). With the parameters FACTOR and DIVIDER, the display can be scaled again if
necessary. (for example, to hide decimal places). The unit “degree” can be set in the SCALE UNITS
parameter.