Balluff BAE SA-OH-059-YI-DP02, Руководство пользователя

Страница: 52 / 62

20 english
Manual Set Menü
TEACH TEA Teach
Manual MAN
Amplific. AMP Amplification: 6..255*
SSC1-SP1 SC1 SSC1 Switching Point 1:
250..500*..4000
SSC1-SP2 SC1 SSC1 Switching Point 2:
250*..4000
SSC2-SP1 SC2 SSC2 Switching Point 1:
250..500*..4000*
SSC2-SP2 SC2 SSC2 Switching Point 2:
250*..4000
T-Select SEL Def.(SSC1), SSC1, SSC2,
SSC1&SSC2
8.3.1 Amplification
The amplification of the receiver signal can be set in the
range of 6..255.
6: Lowest amplification: Smallest signal, less noise, low
range
255: Highest amplification: Largest signal, more noise, high
range
8.3.2 SSC X Parameter
This parameter represents the currently set switching
points (setpoint 1 and setpoint 2). The switching point 1
(setpoint 1) is active in all switching modes and can be
taught. Switching point 2 (setpoint 2) is only active in
Two-Point or Window Mode and is otherwise deactivated.
8
Menu structure (continued)
8.3 Teach
TEACH TEA Teach
1-V-T SP1 1V1 Do-1-V-Teach SP1
2-V-T SP1 2V1 Do TP1 -> Do TP2 -> Apply
Dyn-T SP1 DT1 Start SP1 -> Stop SP1
1-V-T SP2 1V2 Do-1-V-Teach SP2
2-V-T SP2 2V2 Do TP1 -> Do TP2 -> Apply
Dyn-T SP2 DT2 Start SP2 -> Stop SP2
Dyn-T SP12 DT12 Start SP12 -> Stop SP12
Teach menu
Value Meaning Description
1-V-T SP1 1-Value-Teach Setpoint 1 Do set SP1 (and apply)
2-V-T SP1
2-Value-Teach Setpoint 1 Do set TP1 (SP1)
Do set TP2 (SP1)
Apply settings
Dyn-T SP1 Dynamic Teach Setpoint 1 Start Teach SP1
Stop Teach SP1 (and apply)
1-V-T SP2 1-Value-Teach Setpoint 2 Do set SP2 (and apply)
2-V-T-SP2 2-Value-Teach Setpoint 2 Do set TP1 (SP2)
Do set TP2 (SP2)
Apply settings
Dyn-T SP2 Dynamic Teach Setpoint 2 Start Teach SP2
Stop Teach SP2 (and apply)
Dyn-T SP12 Dynamic Teach (Balluff
Spec) Setpoint 12
Start Teach SP12
Stop Teach SP12 (and
apply)
Tab. 8-2: Menu structure – Teach Menu
BAE SA-OH-059-YI-----
Photoelectric Sensors