Balluf BIS M-41 Series, Техническое описание

Страница: 6 / 44

vii
REGULATORY AND COMPLIANCE NOTICES
Installation and startup
Installation and startup are to be performed by trained technical personnel only. Any damage
resulting from unauthorized manipulation or improper use voids the manufacturer's
guarantee and warranty.
When connecting the processor unit to an external controller, observe proper selection and
polarity of the connection as well as the power supply (see „Installation“ on page 4).The
processor unit may only be used with an approved power supply
(see „Technical data“ on page 34).
Conformity
This product was developed and produced in accordance with applicable
European directives. CE conformity has been verified.
All approvals and certifications are no longer valid if:
– Components are used that are not part of the BIS Identification System,
– Components are used that have not been explicitly approved by Balluff.
Operation and testing
The operator is responsible for ensuring that local safety regulations are observed.
In the event of defects and non-correctable faults in the identification system, take the
system out of service and secure it from unauthorized use.
POWER SUPPLY
This product is intended to be installed by Qualified Personnel only.
This device is intended to be supplied by a UL Listed or CSA Certified Power Unit with
«Class 2» or LPS power source.