Balluf BIS M-41 Series, Техническое описание

Страница: 28 / 44

INSTALLATION
21
2
2.6.4 Installing the BIS M-41_ USB
Figure 19 - USB Typical Layout
The BIS M-41_--68-001-09-S72 Compact processor is designed for point-to-point RFID
applications, where the distance from host to compact processor is less than 15 meters (50
feet). The compact processor connects directly to a serial communications port on a host
computer via a USB-compatible interface cable.
1. To mount the BIS M-41_ Compact processor:
a) For the BIS M-410 Compact processor, attach to the polycarbonate mounting bracket
(for metallic isolation) using the two sets of M4 screws, washers and nuts provided as
shown in
Figure 2 . Fasten the other end of the mounting bracket to your work area.
Tighten all screws to 0.7 Nm (6 lbs per inch).
b) For the BIS M-411 Compact processor, fasten it to the mounting surface using two
M5 (#10) screws, washers and nuts (not provided). Tighten all screws to between 1.3
and 1.7 Nm (12-15 lbs per inch).
2. Download the „Bis4D_com“ USB driver archive from www.balluff.com and extract the
archive to a separate folder on the host computer.
3. Connect the BCC0ETF M12 reverse keyed 5-pin female connector to the M12 reverse
keyed 5-pin male connector on the product.
4. Connect the BCC0ETF USB Type A connector to a USB COM port on the host computer.
The LEDs on the compact processor will flash. At this point, Windows will detect the new
hardware device and request the location of the „Bis4D_com“ USB driver files.
5. Browse to the folder containing the „Bis4D_com“ USB driver files. Refer to the
instructions included with the „Bis4D_com“ USB driver download or to par. 4.4, to
complete the installation of the „Bis4D_com“ USB driver.
To verify operations, download the Balluff Dashboard™ Configuration Tool from
www.balluff.com . The Balluff Dashboard™ Configuration Tool allows users to configure and
control their BIS M-41_ compact processors and send RFID commands for testing purposes.
See the Dashboard™ Configuration Tool Manual for details.
BCC0ETF
BIS M-410
Host