BALLHOG Ascent Series, Руководство пользователя

Страница: 15 / 20

888.496.5137
b
all
h
og
g
oals.com
PAGE 15
STEP 10 -RIM ATTACHMENT
Experienced Installer Tip: Apply a small amount of spray adhesive to the backside of the (#12) rubber octagon and adhere it to the
backboard centered between the rim standoff tubes.
•
Using the hardware attached to the rim cover plate, attach the rim to the backboard as shown in Image 11. Snug hardware, do not
fully tighten at this time.
•
Place a level across the rim side-to-side and adjust the rim until it is level.
•
Finish tightening the four (#21) nuts.
Image 11
13
13
31
13
13 31 31
12
DETAIL #5-A (FRONT)
ATTACHING RIM TO
BACKBOARD
NOTE: RIM IS NOT SHOWN FOR CLARITY
RUBBER OCTAGON IS
TO BE PLACED
IN BETWEEN RIM
AND GLASS, AS SHOWN.
21 13
DETAIL #5-B
RIM TO BACKBOARD
(REAR)
21 21
21
13 13
13