background image

888.496.5137 

b

all

h

og

g

oals.com

PAGE 20

WARRANTY

LIMITED LIFETIME WARRANTY

Warranty Coverage:

 Ball Hog Basketball Systems warrants to the original retail purchaser that any product of its manufacture is free from defects in material and 

workmanship.  This warranty is void if the product has been damaged by accident, negligence, use for purposes for which it is not intended, improper service, failure to 
follow the instructions provided with the product or other causes not arising out of defects in material or workmanship.  A limited lifetime warranty is effective for the 
duration of ownership by the original retail purchaser or five years after product discontinuation by Ball Hog Basketball Systems.

Subject to proper installation and normal residential use, Ball Hog Basketball Systems warrants, subject to the limitations below, to the original retail purchaser all 
structural components of the Ball Hog Basketball System to be free of defects in material and workmanship for the duration of ownership by the original purchaser or five 
years after product discontinuation by Ball Hog Basketball Systems.

Not Covered By This Warranty:

 Use of product in non-residential applications including, but not limited to, schools, parks, public or private recreational facilities.  

Product subjected to abuse, negligence, improper installation, vandalism, acts of God, alteration of product and any other events beyond the control of Ball Hog 
Basketball Systems.  Paint or rusted parts.  If rust should appear, remove loose paint, lightly sand affected area, primer and paint with an exterior enamel paint.  Rims are 
not warranted for any defects other than workmanship.  Bent rings, torn back plates, damaged springs and damaged eyebolts are a result of hanging on the rim and are 
not warranted.  Shipping charges both ways.  Product shipped collect will be refused.  Protective padding is not warranted for any defects other than workmanship for a 
period of one year.  Service charges, labor charges, equipment rental and travel expenses associated with the replacement of repair or warranty item. 

Ball Hog Basketball Systems reserves the right to examine photographs or physical evidence of product claimed to be defective, and to recover said product, prior to 
authorization of warranty claims.  All warranty claims must be arranged through Ball Hog Basketball Systems prior to any product returns.

The sole obligation of Ball Hog Basketball Systems and the exclusive remedy under the applicable warranty, is repair or replacement of any component part determined 
by Ball Hog Basketball Systems to be defective and covered by the warranty.  Ball Hog Basketball Systems will not be liable for any other damages or expenses. 

Warranty Disclaimers: 

The applicable warranty is expressly in lieu of all other warranties, expressed or implied.  Ball Hog Basketball Systems does not assume, and no 

other person or representative is authorized to assume for Ball Hog Basketball Systems any other liability in connection with the sale of Ball Hog Basketball Systems 
products.  Under no circumstances shall Ball Hog Basketball Systems be liable for any indirect, consequential, special, incidental, punitive or exemplary damages of any 
kind.  The Ball Hog Basketball Systems product is intended to be used to play the sport of basketball.  All sports involve risk of injury.  The user assumes all risk of injury 
resulting from the use of this product.  All products are sold on this condition and no representative of Ball Hog Basketball Systems may waive or change this policy.

Some states do not allow the exclusion or limitation of implied warranties or consequential or incidental damages, so the above limitations or exclusions may not apply 
to you.

Legal Remedies: 

This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.

Warranty Guidelines Required For All Warranty Claims

1. 

Proof of purchase (original retail purchaser) is required for all warranty claims.

2. 

Call or write Ball Hog Basketball Systems to receive a Return Authorization Number and any instructions for the return.

Questions or Comments

Phone: 1-888-496-5137

Email: [email protected]

www.ballhoggoals.com

Ball Hog Basketball Systems

Attn: Warranty Department

205 Boring Drive

Dalton, GA 30721

No part of this manual may be reproduced in any form or by any means electronic or mechanical, including photocopying, recording or 
by any information storage and retrieval systems without the express written consent of Ball Hog Basketball Systems.

Содержание Ascent Apex





















Отзывы: