Page 3 of 4
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
LEVELERS: Table is equipped with Rotary Levelers installed under each Leg. If necessary, Table
may be adjusted by carefully lifting applicable corner and turning Leveler clockwise/counterclockwise.
Assemble in location for intended use.
STEP 1: Carefully invert Top (G) onto a level, padded surface then postion a leg into each corner as
illustrated. Insert Allen Bolt (C) with Lock Washer (B) and Flat Washer (A). Fully tighten using Allen
Wrench (D). Carefully turn assembled Table upright onto Legs.
