Page 4 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
(O)
(P)
(N)
(M)
STEP 5:
Carefully insert each Back Support (N) into pockets along edge of Back Sling (M). Next, insert
each Seat Support (P) into pockets along edge of Seat Sling (O). NOTE: Replacement Slings are
available. Sold separately (Item Number JC157)
5
Create Seat and Back Slings
STEP 6:
Insert Seat and Back Assemblies (from STEP 5) into channels in Chaise Frame (L). Secure by
inserting Nuts (D) into holes on outside of Frame then inserting Allen Bolt (C) from inside Frame. Insert
one Allen Wrench (F) into Nut and the other Allen Wrench (F) into Bolt then turn and tighten to secure.
Channel
(D)
(C)
(L)
(O & P)
(O & P)
(M & N)
(M & N)
(L)
6
Attach Seat and Back Covers
