Page 3 of 5
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
STEP 1:
Attach a Left and Right Leg (G,I) to each end of Crossbar (H) using Allen Screws (A). Tighten
using Allen Wrench (F). Repeat process for remaining Left and Right Legs and a remaining Crossbar.
IMPORTANT:
Be certain PEG HOLES are identically oriented on both assemblies.
(J)
(I)
(G)
(H)
Peg Hole
(H)
(A)
(A)
(K)
STEP 2:
Attach Middle Left and Right Leg (J,K) to each end of remaining Crossbar (H) using Allen
Screws (A). Tighten using Allen Wrench (F).
1
2
STEP 3:
Attach an assembly created in STEP 1 onto each end of Chaise Frame (L) by first fitting peg
holes over pegged ends then inserting Allen Screws (A) and tightening using Allen Wrench (F).
STEP 4:
Attach assembly created in STEP 2 to underside middle of Chaise Frame (L) using Allen
Bolts (B) inserted from inside through each Leg and into Frame. Tighten using Allen Wrench (F).
Create End Support Assemblies
Create Middle Support Assembly
(G)
(G)
(I)
(A)
(A)
(K)
(B)
(L)
3
4
Attach End Assemblies
Attach Middle Assembly
