TIP
CONSIDER USING LED BULBS
Lower Energy Consumption
Minimal Heat / Longer Life / High Illumination
Unplug lamp prior to installation or removal. Turning off switch is not sufficient.
STEP 4: INSTALL FIXTURE
Carefully raise Fixture Body (A) to Mounting
Bracket (D). Align holes in each side of Backplate
with threaded holes in each side of Mounting
Bracket. Insert and tighten Backplate Side
Screws (C) using a Phillips screwdriver.
STEP 5: COMPLETE FIXTURE ASSEMBLY
Gently insert and tighten bulb, attach Harp (F) to
Saddle then add Shade (not included) followed
by Finial (G).
Socket is rated up to a *60 WATT MAXIMUM
Type A Medium Base Bulb. LED/CFL may be
used. To mimic the color of an incandescent,
choose 2700K Soft White.
*NOTE: To obtain greater light ouput without
exceeding the socket wattage limitation, consider
using an LED bulb which uses approximately a
tenth of energy used by a standard incandescent.
See below:
Light
Output
(Lumens)
Energy Consumption
(Watts)
LED
Incandescent
450
4-5
40
800
6-8
60
1,100
9-13
75
1,600
16-20
100
2,600
25-28
150
Page 4 of 4
(D)
(C)
(A)
(G)
(F)
Saddle
Cleaning and Care
Periodically wipe Fixture with a soft, dry cloth.
Avoid harsh or abrasive chemicals as
finish damage may result.
