Page 4 of 4
NOTE: Before starting assembly of this Lamp, be sure it has been unplugged.
Turning the switch off is not sufficient enough.
STEP 3:
Turn the Base (D) upside down and run the
wire through the Clip (E). Close the arm of the
Clip to lock the wire into place. Then stick
the Pad (F) onto the bottom of the Base.
STEP 4:
Unscrew the socket ring to attach the Shade
(G) to the Pole (A). Then secure the Shade into
place by screwing the socket ring back on.
Screw in the Bulb. This Lamp has been rated
for up to a 100 Watt MAX Type A Bulb
(NOT included).
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning & Care:
To clean, wipe the Fixture with a soft, dry cloth.
Avoid the use of harsh or abrasive
chemicals as they may damage the finish
(A)
(E)
(F)
(D)
(G)
