Ballantine 3207, Инструкция по эксплуатации

Страница: 19 / 35

BALLANTINE LABORATORIES, Inc. MODEL 3207 MICRO-OHM METER
19
SECTION 3
PREPARATION OF OPERATION.
3.1 Installation:
The instrument is fully solid state and dissipates minimum heat and no special cooling is
required. However the instrument should not be used where ambient environment is beyond
the temperature limits indicated in the specifications. The instrument is shipped ready for use
as a portable or bench instrument.
Warning !
Do not operate the instrument where inflammable gases are present to avoid fire
hazard.
3.2 Power requirement;
The instrument requires Single Phase 115V, 60Hz AC mains supply with proper grounding.
Warning !
The instrument is provided with a three terminal power cord, which will ground the
case when connected to a three terminal grounding outlet. If a grounding outlet is not
available, an adapter must be used which provides a good grounding connection.
Caution
Use the specified AC mains voltage, otherwise you may damage the instrument and void
the warranty.
3.3 Bench Mounting:
This Instrument is fitted with four rubber feet. It is intended to stand on a bench. The
Instrument is provided with carrying handle which also serve as a tilt-stand to adjust the
viewing angle of the Instrument from the bench level. Refer to fig. 3.1