30
31
Integrating Your Shades with a Z-Wave Home Automation System
Integrating Your Shades with a Z-Wave Home Automation System
INTEGRATING YOUR
SHADES WITH A Z-WAVE
®
HOME AUTOMATION SYSTEM
Your shades and remotes operate using Z-Wave radio
technology, which allows you to control your shades with many
popular home automation systems.
To integrate your shades with a home automation system, you’ll
perform three tasks:
1.
Exclude:
Remove the current pairing between your shades
and remotes.
2.
Include:
Add your shades and remotes to the home
automation system.
3.
Associate:
Pair remotes with your shades.
The following sections walk you through each task.
NOTE
If you don’t press any buttons for 10 seconds while you’re performing these
steps, the remote will time out. If that happens, just start the process over.
Step 1: (Exclude) Remove the Current Pairing
Between Your Shades and Remotes
1. Reset each two-button or single-channel
remote, if you have them.
a. Press and hold the program button on
the back of the remote for 15 seconds
until the remote LED stops flashing.
The remote LED should flash green, amber, and
red before turning off.
2. Reset your multi-channel remote,
if you have one.
a. Press and hold the MENU/
RIGHT button for 2 seconds to
enter the menu.
b. Select ZWAVE > RESET.
c. With LIKE NEW? selected,
press and hold the MENU/
RIGHT button until the screen
no longer tells you to wait.
3. On each shade, press and hold the
program button for 7 seconds. When
the shade jogs, release the button.
All remotes are now removed from the
shades. However, the shades’ upper, lower,
and home positions are still set.
