18
19
Adjusting Your Shade’s Limits and Home Position
Adjusting Your Shade’s Limits and Home Position
Adjusting the Home Position
Before you start, decide whether you want to adjust your
shade’s upper or lower limit. If you do, make those changes
first—moving those limits will reset your home position.
Remember that the home position isn’t available with the two-
button remote.
If your remote currently controls a group of shades, you’ll first
need to target the specific shade that you want to adjust the
home position for. To do that, perform the following steps:
1.
On the remote, press and release the program button on
the back.
The remote LED will flash green.
2.
On the shade you want to adjust, press and hold the
program button for 3 seconds.
The shade LED will flash green and the shade will jog.
Even after you target a shade, all of the shades in the group will
still move with the remote. However, nontargeted shades won’t
accept the new home position until you target them specifically.
For the Single-Channel Remote
Before You Start
TARGET
SHADE
2. Press and hold the HOME button for
3 seconds. When the remote LED turns
amber, release the button.
The shade will jog. This means you’ve set your
new home position on that shade.
3.
If you need to adjust another shade’s
home position, go back to the
Before
You Start
section and repeat the steps
for each shade.
1. On the remote, use the UP and
DOWN buttons to move the shade to
your desired home position.
Legend
Press and hold
Move up
Press and release
Move down
