BV225 Amplifier
Installation Instructions
BV225 Installation Manual issue 3
1
1 Introduction
1.1 BV225 A
MPLIFIER
D
ESCRIPTION
The BV225 Amplifier module is a 225 Watt Class “D” Power
amplifier with a 500mV Balance Line audio input and 100V Line
output.
The front panel status indicators show “Power”, “Overload” and
Output Level (10% and 100% output level).
The audio input is presented on two separate RJ45 connectors.
The output is presented on two 3-way plug/cage clamp
termination connectors providing 50V or 100V output.
The 24V DC input is presented on a two 2-way crimp connected
socket.
The power output stage of the amplifier is protected against
overload conditions (i.e. short circuits or abnormal loads).
Should an amplifier be subjected to an abnormal load the input to
the relevant power amplifier is attenuated to a safe level and the
“Overload” LED will be illuminated. The amplifier output
voltages are also sensed and should they exceed 100V the relevant
input signal will be attenuated ensuring safe operation without
creating unnecessary distortion.
