BFM 400 Microphones
Operating Instructions
16
BFM400 Operation Manual issue 7
indicate a "Transmission Fault" and after 1 hour the
connected BVRD2M or BVRD2M4 will indicate a "System
Fault" which will need to be manually accepted and reset at
the router.
Note: Before the Microphone can be used the RS485 button allocation
data must be downloaded from the BVRD2M.
Press and hold the "FAULT ACCEPT" button for 2 seconds to load the
current button allocation data.
It is necessary to download this data after entering Configuration Mode.
N
OTE
:
If the Protocol is changed then the Mic Address MUST
BE RE-ENTERED or the Channel Setting may be incorrect.
N
OTE
:
If a configuration change is made it must be accepted
by following step 8 above.
