Note: If loading of Default values has changed any of the set values it
will be neccasary to press and hold the "Faul Accept" and "Speak"
buttons for 5 seconds in order to accept the new Configuration. Failure to
perform this step will result in the Microphone and connected BVRD2M/
4 routers indicating a Fault.
BFM 400 Microphones
Operating Instructions
12
BFM400 Operation Manual issue 7
3.2 C
ONTROLS
& I
NDICATORS
FOR
C
ONFIGURATION
When in Configuration Mode, the functions of the front panel
indicators and controls are as shown in Figure 3.1.
Figure 3.1 — Controls when in Configuration Mode
Original Function Function in "Configuration" Mode
A
"Speak Now" LED
Flashes
to show the
current setting
of the value or
function
B
"VA Active" LED
Flashes
to show the
current location
in the
Configuration Table
C
"Speak" Button
Press
to
change the setting
of the value or function
D
"Fault Accept"
Button
Press
to
step on to the next location
in the internal
Configuration Table
3.3 E
NTERING
“C
ONFIGURATION
M
ODE
”
1. Disconnect power from the unit by removing the RJ45 cable.
2. Press and hold the “Fault Accept” button (“D” in Figure 3.1).
3. Connect the RJ45 cable.
4. Release the “Fault Accept” button when the “Busy” indicator
(item “B” in Figure 3.1) flashes.
