BALDR B0367STHR, Руководство пользователя

Страница: 9 / 69

9
EN
There are daily automatic RCC receiving at 1:00AM,2:00AM,
3:00AM, 4:00AM,5:00AM. It will first start receiving DCF/
WWVB/MSF time at 1:00AM, 2:00AM, 3:00AM each day. If DCF/
WWVB/MSF time is not received till 3:00AM, it will start
receiving again at 4:00AM and 5:00AM. If the time is not
successfully received at 5:00AM, there will be no receiving the
day, It will start searching for signal at 1:00AM the next day.
2.
On normal time mode, press “SET ’’ button to enter RCC signal
receiving.
3.
During RCC reception, press“SET ’’ button to exit RCC receiving. 4.
The time will be converted to the current time of corresponding
time zone after receiving the RCC .(Except 0 time zone)
a. When receiving signal , RCC icon will be flashing by“1HZ”
It will exit RCC receiving automatically when the alarm is per-
formed during RCC reception , you can repeat step 3 to enter
RCC signal receiving after turning off the alarm.
5.
After signal received, if there is no need for other settings, you
can just finish reading here. If there is other setting requirements.
Please check the following steps. Or if there is no signal received,
you can follow bellow steps for manual setting.
1.
c. If no signal is received, the RCC icon will disappear.
Remark:
SET MANUAL TIME
RCC symbol display:
●
b. When signal successfully received, LCD will display complete
RCC icon and exit RCC receiving.