23
Precautions
Do not clean any part of the product with benzene, thinner or other
solvent chemicals. When necessary, clean with a soft cloth.
Never immerse the product in water. This will damage the product.
Do not subject the product to extreme force, shock, or fluctuations in
temperature or humidity.
Do not tamper with the internal components.
Do not mix new and old batteries or batteries of different types.
If your BALDR product does not operate properly after trying the
troubleshooting steps, contact the seller on your order page or
shoot an email to: [email protected].
feet (0.9 m) away from electronics that may
interfere with
the wireless communication (such as TVs,
microwaves, computers, etc).
• Use standard alkaline batteries. Do not use
heavy duty or rechargeable batteries. NOTE
: It may take a few minutes for main unit and
sensor to synchronizeafter batteries are
reloaded.
Make sure both the main unit and sensor are
placed out of direct sunlight and away from
any heat sources or vents.
If the temperature is higher than the detection
range, HH will display on screen for indication
; if lower than the detection range, LL will
display on screen for indication.
Inaccurate
temperature/
humidity
“HH/LL” display in
indoor and/or
outdoor
temperature
ENEN
