RF signal will not receive during the RCC reception,please exit the
RCC receiving first by pressing the “SET/ ”Button.
Pressure Unit
hPa/mb
GER
0:00
(24H format)
ON
2020.01.01
Weekday
Language
Display Time
Key tone
Display Date
Temperature
Unit
℃
ON
0hr
AM6:30(OFF)
RCC
Function
Time zone
Alarm Time
11
RF SIGNAL RECEIVING
RCC RECEIVING
1. After RF signal receiving, it will start searching radio signal for 7
minutes with the antenna symbol “ ’’displaying on screen.
2. There are daily automatic DCF receiving at 1:00AM,2:00AM, 3:00
AM, 4:00AM, 5:00AM. It will first start receiving DCF time at 1:00
AM, 2:00AM, 3:00AM each day. If DCF time is not received till
3:00AM, it will start receiving again at 4:00AM and 5:00AM. If the
time is not successfully received at 5:00AM, there will be no
receiving the day, It will start searching for signal at 1:00AM the
next day.
The default value is :
After barometer setting, it will start receiving outdoor sensor’s signal
for 3 minutes. If all 3 channels signal received within 3 minutes or
receiving window ends, it will enter into DCF signal receiving window.
ENEN
3. On normal time mode, press
“SET /RCC’’
button to enter DCF
signal receiving.
