Baldor VS1STS Series, Инструкция по установке и эксплуатации, Страница: 59 / 74

Parameter Tables B-3 MN767S
Param
#
Access Parameter Name Description (Range)
Factory
Setting
User
Setting
P0-52 RO Speed Hysteresis Value Internal value
Read
Only
P0-53 RO PID DC Bus Feedback Value 0..4096
Read
Only
P0-54 RO Modbus Comms Error 0 … 65535
Read
Only
P0-55 RO Modbus Speed Reference Internal value
Read
Only
P0-56 RO Droop Speed Internal value
Read
Only
P0-57 RO Encoder Speed -P1-06 to P1-06
Read
Only
P0-58 RO Speed Jump Zone Internal value
Read
Only
P0-59 RO
Modbus Write Command
Data Value
Register dependent
Read
Only
P0-60 RO Motor Control Loop ID 0 … 65535
Read
Only
P1-01 RW Motor Rated Voltage 0, 20 to 600 575
P1-02 RW Motor Rated Current 25% -100% of drive rated current
Drive
rating
P1-03 RW Motor Rated Frequency 25Hz to 2000Hz 60
P1-04 RW Motor Rated Speed 0 to 60000 rpm 0
P1-05 RW Minimum Frequency / Speed 0.0 to P1-06 0.0
P1-06 RW Maximum Frequency / Speed P1-05 to 5*P1-03 (max 2000Hz) 60.0
P1-07 RW
Terminal / Keypad / PID
Drive Control Mode Selection
0: Terminal Control
1: Keypad Control – fwd only
2: Keypad Control – fwd and rev
3: PID Control
4: Modbus RTU Control
0
P1-08 RW Digital Input Function Select 0 to 22 0
P1-09 RW Stop Mode Select
0: Ramp to Stop
1: Coast to Stop
2: Ramp to Stop with ‘Fast Stop’
0
P1-10 RW Acceleration Ramp Time 0.0 to 3000.0 5.0
P1-11 RW Deceleration Ramp Time 0.0 to 3000.0 5.0
P1-12 RW Energy Optimizer
0: Disabled
1: Enabled
0
P1-13 RO Trip Log Last four trips stored
Read
only
P1-14 RW Extended Menu Access Code 0 to 30000 0
P2-01 RW Preset Speed 1 -P1-06 to P1-06
50.0
(60.0)
P2-02 RW Preset Speed 2 -P1-06 to P1-06 0.0
P2-03 RW Preset Speed 3 -P1-06 to P1-06 0.0
P2-04 RW Preset Speed 4 -P1-06 to P1-06 0.0
P2-05 RW Preset Speed 5 -P1-06 to P1-06 0.0
P2-06 RW Preset Speed 6 -P1-06 to P1-06 0.0
P2-07 RW Preset Speed 7 -P1-06 to P1-06 0.0
P2-08 RW Preset Speed 8 -P1-06 to P1-06 0.0
P2-09 RW Skip Frequency P1-05 to P1-06 0.0
Table B-1 Parameters Sorted by Parameter Number (Cont.)