Baldor VS1STS Series, Инструкция по установке и эксплуатации, Страница: 10 / 74

1-4 Introduction MN767S
Figure 1-2 Input Connections
Frame B
1
2
3
4
5
6
7
8
9
10
1 1
Control Terminals
Tightening Torque =
4.4 lb-in (0.5 Nm)
Table 1-1 Control Terminal Descriptions
Terminal Signal Description
1 +24VDC @ 100mA
2 Digital Input 1 (8-30VDC)
3 Digital Input 2 (8-30VDC) / Digital Output 3 (24V, 10mA max.)
4 Digital Input 3 (8-30VDC) / Analog Input 2 (0-10VDC, 0-20mA or 4-20mA)
5 +24VDC @ 100mA Reference for Potentiometer (1kohm minimum)
6 Analog Input 1 (0-10VDC, 0-20mA or 4-20mA) / Digital Input 4 (8-30VDC)
7 Common (terminals 7 & 9 are connected)
8 Analog Output (0-10VDC @ 20mA max.) / Digital Output (0-24VDC @ 20mA max.)
9 Common (terminals 7 & 9 are connected)
10 Relay Common
11 Relay N.O. Contact (rated 250VAC@6A; 30VDC@5A)