Baldor NEMA-4X, Инструкция по установке и эксплуатации

Страница: 6 / 40

6
TABLE 3 - TRIMPOT ADJUSTMENTS (See Section 7.2, on page 30)
Trimpot Description
Minimum Speed (MIN), Refer to Section
7.2.1, page 30. Sets the minimum speed of the motor. Range of
adjustment 0 to 30% of base Speed.
Maximum Speed (MAX), Refer to Section
7.2.2, page 30. Sets the maximum speed of the motor. Range of
adjustment 60% to 140% of base Speed.
Acceleration (ACCEL), Refer to Section
7.2.3, page 30. Sets the amount of time for the motor to accelerate
from zero speed to full speed.
Deceleration (DECEL), Refer to Section
7.2.4, page 31. Sets the amount of time for the motor to
decelerate from full speed to zero speed.
Current Limit (CL), Refer to Section 7.2.5, on
page 31.
Sets the maximum amount of DC current that the
motor can draw. This determines the amount of
maximum motor torque in both the Speed Control
Mode and Torque Mode.
IR Compensation (IR), Refer to Section 7.2.6,
page 32. Sets the IR Compensation circuit for stability
(motor speed), under varying loads.
Timed Current Limit (TCL), Refer to Section
7.2.7, page 32. Sets the approximate amount of time the drive will
stay in Current Limit before trip out...
JOG Speed, Refer to Section 7.2.8, page 32.
The JOG trimpot maybe adjusted to set JOG
speed. Adjustment of this trimpot has no effect
unless the optional RUN-STOP-JOG Switch
(BC157) is installed.