3
−
2 Maintenance & Troubleshooting
MN427
Interval and Type of Grease
Use Mobilith SHC Series grease or equivalent unless motor nameplate specifies special grease.
Amount of grease to be added to RPM AC motors.
Table 3-1 Relubrication Amount
Frame Size
Grease Type
Vol. in Cubic in
3
(cm
3
)
Weight oz (gram)
Relubrication Interval (Hrs.)
FL250
SHC220
1.0 (16)
0.5 (14)
17,500
FL280
SHC460
1.5 (24)
1.25 (35)
17,500
FL440
SHC460
5 (48)
2.5 (70)
17,500
FL5800
*
12 (197)
6.0 (170)
8,750
*Klubersynth BH72
−
422
The relubrication interval is given in Table 3-1 ( or sooner) unless otherwise specified on the motor
lubrication nameplate.
Lubrication cycle based upon maximum ambient temperature of 40
C and a minimum air flow of
750ft/min over the motor.
Motors are shipped from the factory with full grease cavities and ready for operation.
This Manual:http://www.manuallib.com/baldor/mn427-inverter-duty-pm-motors-manual.html